Published 20 November 2026
How to mouse-proof your home before winter (and why foam isn't enough)
GEM Services treats pests in homes and businesses across Kent and East Sussex.

In short: a mouse can get through a gap about the width of a pencil. Most homes that get mice every winter have the same few weak points: gaps around pipes and cables, under doors, around the boiler flue, damaged airbricks and the garage. Block them with materials mice can't chew through, such as wire wool packed in with sealant, galvanised mesh and metal-backed door strips. Expanding foam on its own gets chewed straight through. Never block airbricks or vents completely.
Every autumn, the same thing happens in thousands of homes. The weather turns, mice move indoors, and someone hears scratching in the kitchen ceiling. Traps or bait deal with the mice that are in. Next autumn, more arrive through the same gap.
Treating mice without proofing is renting a solution. Proofing is buying it.
How small a gap does a mouse need?
Much smaller than most people think. A house mouse can squeeze through a gap of around 6 mm, roughly the width of a pencil. If the mouse's head fits, the rest of it follows.
That changes where you look. You're not looking for holes. You're looking for gaps, cracks and joints.
Where mice get in
These are the places we find entry points most often, roughly in order:
1. Around pipes and cables. Where water pipes, waste pipes, gas pipes and cables pass through outside walls, the hole is often cut bigger than the pipe and never sealed. Check under the kitchen sink, behind the washing machine and dishwasher, and where the outside tap goes through the wall.
2. Under and around doors. External doors, back doors and especially garage doors. Daylight under a door means a gap. Up-and-over garage doors often have large gaps at the corners.
3. The boiler flue and extractor vents. The gap around a flue or a kitchen or bathroom extractor fan is a common route, especially if the seal has cracked.
4. Airbricks. Old clay airbricks with broken grilles, or plastic ones that have been chewed, give mice direct access to the void under suspended floors. From there they reach kitchens, the backs of cupboards and wall cavities. If you're hearing noises under the floor, our guide to rats under floorboards covers the same space.
5. Gaps in brickwork and render. Missing mortar, cracks where an extension meets the original house, and weep vents above windows and doors.
6. The roofline. Gaps at the eaves, soffits and fascias, and where the roof meets a wall. Mice climb well, especially up rough brick, ivy and drainpipes.
7. The garage. Integral garages are often the weakest part of a house. Check the door into the house as well as the garage door itself.
What to block gaps with
This is where most DIY proofing goes wrong.
Expanding foam on its own doesn't work. Mice chew through it easily. It's fine as a filler behind something tougher, but not as the barrier.
What does work:
- Wire wool or copper mesh, packed in tightly, then sealed over with a good exterior sealant or mortar. Mice won't chew through the metal.
- Galvanised steel mesh with small holes, fixed over larger openings. Use mesh fine enough that a mouse can't fit through it.
- Metal or bristle door strips at the base of external and garage doors. Brush strips work best when the bristles are dense and touch the floor.
- Mortar or exterior filler for cracks and missing mortar in brickwork.
- Mouse-proof airbrick covers with fine mesh. These replace or cover broken airbricks without blocking the airflow.
What not to block
Proofing should never make your home less safe or damp.
- Never block airbricks or vents completely. Under-floor ventilation stops timber rotting. Use a mesh cover instead.
- Don't seal gas appliance vents or flues. If you're not sure what a vent is for, leave it alone and ask.
- Don't trap mice inside. If mice are already living in the house, block the routes after you've dealt with them, or you may trap them in a wall cavity.
Inside the house
Proofing the outside is what keeps new mice out. Inside, the aim is to give any mouse that does get in less reason to stay:
- Food in sealed containers. Cereals, pet food, bird seed and anything in a paper or cardboard packet.
- Behind the appliances. Crumbs and grease build up behind cookers, fridges and dishwashers, which is exactly where mice like to live.
- Kick boards. The void behind kitchen kick boards is a favourite nesting spot. Make sure the boards fit snugly.
- Clutter in lofts, garages and cupboards. Boxes of stored papers and fabric make ideal nests.
The outside matters too
Mice don't arrive at the wall by accident. Bird feeders, compost heaps and wood piles close to the house bring them closer. Our guide to rats in the garden covers the changes that make a garden less attractive to rodents, and the same steps work for mice.
How to check if your proofing has worked
- Put down a little flour or talc along the foot of a wall where you've seen activity, and look for footprints the next morning.
- Check for fresh droppings after a week or two. Clear the old ones first so you can tell.
- Listen. Scratching at night in walls or ceilings usually means mice are still getting in, or were already inside.
If the signs carry on after you've blocked everything you can find, there's a route you haven't found. That's the point where a professional inspection usually saves time and money.
How we help
We treat mice across Kent and East Sussex: an inspection to find how they're getting in, treatment for any mice already inside, follow-up monitoring, and proofing of the entry points we find with mesh, sealant and door proofing. See mouse control.
GEM Services is a BPCA member company, assessed against BS EN 16636, with £10 million public liability insurance. There's no call-out fee, and you get a free, no-obligation quote before any treatment starts. Get in touch.
Frequently asked questions
How small a gap can a mouse get through?
Around 6 mm, roughly the width of a pencil. If a mouse's head fits through a gap, its body usually can too.
Does expanding foam stop mice?
Not on its own. Mice chew through it easily. Pack the gap with wire wool or copper mesh first, then seal over it with exterior sealant or mortar.
When should I mouse-proof my home?
Before the weather turns cold, ideally in early autumn, because that's when mice start moving indoors. But it's worth doing any time you find a gap.
Can I block my airbricks to stop mice?
No. Airbricks ventilate the space under suspended floors and stop timber rotting. Fit a mouse-proof mesh cover instead.
Will mouse-proofing get rid of the mice already inside?
No. Proofing stops new mice getting in. Any mice already inside need to be dealt with first, otherwise you may trap them in the walls.
Need professional pest control?
GEM Services, a BPCA member company, treats pests in homes and businesses across Kent and East Sussex, with a free, no-obligation quote before any treatment starts.